MS35265-59 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS35265-59: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.167 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-803-9738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35265-59

NSN: 5305-00-803-9738
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

head_style	FILLISTER
head_height	0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
hole_diameter	0.046 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.167 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_material	STEEL
fastener_length	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	SLOT
nominal_thread_diameter	0.190 INCHES IN
NSN	5305-00-803-9738

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE

•

FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.167 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: FILLISTER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
FASTENER LENGTH	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.167 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 2

FFS92TYPE1STYLE5SReference document

Same NSN cross-reference

Reference document — Identification reference

110485Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS35265-59?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS35265-59?

MS35265-59 is a SCREW,MACHINE.

What parts can replace MS35265-59?

There are 2 known substitutes for MS35265-59: FFS92TYPE1STYLE5S, 110485. Substitute compatibility should be verified for your specific system.

What is the NSN for MS35265-59?

MS35265-59 is cataloged in the U.S. Government catalog under NSN 5305-00-803-9738. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS35265-59 — SCREW,MACHINE

Request a Quote — MS35265-59