PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35250-75
MS35250-75 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM IN, thread_length: 0.746 INCHES MINIMUM AND 0.759 INCHES MAXIMUM IN, screw_material: STEEL COMP 410, fastener_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-042-1209, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35250-75
NSN: 5305-00-042-1209
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.348 INCHES MINIMUM IN
thread_length0.746 INCHES MINIMUM AND 0.759 INCHES MAXIMUM IN
screw_materialSTEEL COMP 410
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-042-1209
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35250-75 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.746 INCHES MINIMUM AND 0.759 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW MATERIAL: STEEL COMP 410
•
THREAD SERIES DESIGNATOR: UNF
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.746 INCHES MINIMUM AND 0.759 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIALSTEEL COMP 410
THREAD SERIES DESIGNATORUNF
FASTENER LENGTH0.875 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
726190-2Interchangeable
interchangeable cross-reference
interchangeable
0920-68Interchangeable
interchangeable cross-reference
interchangeable
003-007861-068Interchangeable
interchangeable cross-reference
interchangeable
15SF24Interchangeable
interchangeable cross-reference
interchangeable
713418Interchangeable
interchangeable cross-reference
interchangeable
15SBB24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35250-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35250-75?
MS35250-75 is a SCREW,MACHINE.
What parts can replace MS35250-75?
There are 9 known substitutes for MS35250-75: 726190-2, 0920-68, 003-007861-068 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35250-75?
MS35250-75 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-042-1209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35250-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026