PartsTable
Technical Data Sheet
Download PDF

MS35250-1 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35250-1: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.017 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.101 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, thread_length: 0.125 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-818-2014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35250-1
NSN: 5305-00-818-2014
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.017 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.101 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
thread_length0.125 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-818-2014
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35250-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.017 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.125 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.017 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.125 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.060 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 4
0411-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
010940Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0-80X1-8SLTDFLHSTSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
90-172-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35250-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35250-1?
MS35250-1 is a SCREW,MACHINE.
What parts can replace MS35250-1?
There are 4 known substitutes for MS35250-1: 0411-15, 010940, 0-80X1-8SLTDFLHST and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35250-1?
MS35250-1 is cataloged in the U.S. Government catalog under NSN 5305-00-818-2014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35250-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.