PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35250-02
MS35250-02 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.105 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, thread_length: 0.153 INCHES MINIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.1875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-682-5695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35250-02
NSN: 5305-00-682-5695
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.105 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
thread_length0.153 INCHES MINIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.1875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch80
NSN5305-00-682-5695
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35250-02 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.1875 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SCREW MATERIALSTEEL CORROSION RESISTING
THREAD SERIES DESIGNATORUNF
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.1875 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
NOMINAL THREAD DIAMETER0.060 INCHES IN
THREAD QUANTITY PER INCH80
HEAD DIAMETER0.105 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
70A3115006-480Interchangeable
interchangeable cross-reference
interchangeable
07-7510-3Interchangeable
interchangeable cross-reference
interchangeable
MS51960-2Interchangeable
interchangeable cross-reference
interchangeable
040-D0-A1C-4C2Interchangeable
interchangeable cross-reference
interchangeable
011373Interchangeable
interchangeable cross-reference
interchangeable
01/1373Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35250-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35250-02?
MS35250-02 is a SCREW,MACHINE.
What parts can replace MS35250-02?
There are 11 known substitutes for MS35250-02: 70A3115006-480, 07-7510-3, MS51960-2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35250-02?
MS35250-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-682-5695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35250-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026