PartsTable
Technical Data Sheet
Download PDF

MS35249-53 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35249-53: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-022-7139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35249-53
NSN: 5305-00-022-7139
NIINs: 000227139, 007640070
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-022-7139
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35249-53 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.510 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
SCREW MATERIAL: STEEL COMP 410
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.625 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.510 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
SCREW MATERIALSTEEL COMP 410
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 5
WC1051-051Reference document
Same NSN cross-reference
Reference document — Secondary reference
GA3136-051Reference document
Same NSN cross-reference
Reference document — Secondary reference
8599259-249Reference document
Same NSN cross-reference
Reference document — Secondary reference
112-0783-051Reference document
Same NSN cross-reference
Reference document — Secondary reference
227139Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS35249-53?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35249-53?
MS35249-53 is a SCREW,MACHINE.
What parts can replace MS35249-53?
There are 5 known substitutes for MS35249-53: WC1051-051, GA3136-051, 8599259-249 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35249-53?
MS35249-53 is cataloged in the U.S. Government catalog under NSN 5305-00-022-7139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35249-53