PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35249-26
MS35249-26 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-7062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35249-26
NSN: 5305-00-022-7062
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-022-7062
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35249-26 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD DIAMETER0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
THREAD LENGTH0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL CORROSION RESISTING
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
418198-19Interchangeable
interchangeable cross-reference
interchangeable
003-008563-019Interchangeable
interchangeable cross-reference
interchangeable
AN505C4R12Interchangeable
interchangeable cross-reference
interchangeable
541-750C2-52Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35249-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35249-26?
MS35249-26 is a SCREW,MACHINE.
What parts can replace MS35249-26?
There are 4 known substitutes for MS35249-26: 418198-19, 003-008563-019, AN505C4R12 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35249-26?
MS35249-26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-7062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35249-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026