PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35249-25

MS35249-25 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.575 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-00-022-7061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35249-25
NSN: 5305-00-022-7061
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.575 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-022-7061
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35249-25 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 2S STYLE
•
THREAD LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONDEFINITIVE SPEC/STD DATAI TYPE AND 2S STYLE
THREAD LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
SCREW SURFACE TREATMENTPASSIVATE
INTERNAL DRIVE STYLESLOT
SCREW MATERIALSTEEL CORROSION RESISTING
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
20000571LInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
418198-18InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10125472InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
HSP948R58InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
541-625C2-52InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
A1AMD0410GInterchangeableGOVERNMENT REGISTRY
Screw,machine
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35249-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35249-25?
MS35249-25 is a SCREW,MACHINE.
What parts can replace MS35249-25?
There are 14 known substitutes for MS35249-25: 20000571L, 418198-18, 10125472 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35249-25?
MS35249-25 is cataloged in the Federal Logistics Information System under NSN 5305-00-022-7061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35249-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026