PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35249-20
MS35249-20 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-7053, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35249-20
NSN: 5305-00-022-7053
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.102 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength800000 POUNDS PER SQUARE INCH LBS
NSN5305-00-022-7053
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35249-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 40
•
THREAD LENGTH: 0.164 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL COMP 410
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH40
THREAD LENGTH0.164 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 410
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NOMINAL THREAD DIAMETER0.112 INCHES IN
THREAD CLASS2A A
NONDEFINITIVE SPEC/STD DATA2S STYLE AND 1 TYPE
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
245122Interchangeable
interchangeable cross-reference
interchangeable
FF-S-92 TY-1 ST Y-2SInterchangeable
interchangeable cross-reference
interchangeable
MS35200-12Interchangeable
interchangeable cross-reference
interchangeable
IFR28SP-1035Interchangeable
interchangeable cross-reference
interchangeable
SM-A-838898Interchangeable
interchangeable cross-reference
interchangeable
010314Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35249-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35249-20?
MS35249-20 is a SCREW,MACHINE.
What parts can replace MS35249-20?
There are 14 known substitutes for MS35249-20: 245122, FF-S-92 TY-1 ST Y-2S, MS35200-12 and 11 more. Substitute compatibility should be verified for your specific system.
Is MS35249-20 still available?
MS35249-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35249-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026