PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35249-10
MS35249-10 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 316, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-7007, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35249-10
NSN: 5305-00-022-7007
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 316
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-022-7007
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35249-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW SURFACE TREATMENT: PASSIVATE
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD QUANTITY PER INCH: 56
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
SCREW SURFACE TREATMENTPASSIVATE
NOMINAL THREAD DIAMETER0.086 INCHES IN
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
THREAD QUANTITY PER INCH56
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
40524002516Interchangeable
interchangeable cross-reference
interchangeable
10079716Interchangeable
interchangeable cross-reference
interchangeable
418331-3Interchangeable
interchangeable cross-reference
interchangeable
340-320-0063Interchangeable
Same NIIN cross-reference
interchangeable
51A119A9-44Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35249-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35249-10?
MS35249-10 is a SCREW,MACHINE.
What parts can replace MS35249-10?
There are 5 known substitutes for MS35249-10: 40524002516, 10079716, 418331-3 and 2 more. Substitute compatibility should be verified for your specific system.
Is MS35249-10 still available?
MS35249-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35249-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026