PartsTable
Technical Data Sheet
Download PDF

MS35245-101 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35245-101: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.109 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.600 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-011-4419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35245-101
NSN: 5305-00-011-4419
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.109 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.600 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.500 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
NSN5305-00-011-4419
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35245-101 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.109 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIALCOPPER ALLOY
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 1
114419Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35245-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35245-101?
MS35245-101 is a SCREW,MACHINE.
What parts can replace MS35245-101?
There is 1 known substitute for MS35245-101: 114419. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35245-101?
MS35245-101 is cataloged in the U.S. Government catalog under NSN 5305-00-011-4419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35245-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.