PartsTable
Technical Data Sheet
Download PDF

MS35242-73 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35242-73: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.478 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-012-0612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35242-73
NSN: 5305-00-012-0612
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.478 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch32
NSN5305-00-012-0612
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35242-73 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.478 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.478 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 4
120612Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFS92TYPE1STYLE2SReference document
Same NSN cross-reference
Reference document — Identification reference
1902835Reference document
Same NSN cross-reference
Reference document — Secondary reference
7706435Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS35242-73?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35242-73?
MS35242-73 is a SCREW,MACHINE.
What parts can replace MS35242-73?
There are 4 known substitutes for MS35242-73: 120612, FFS92TYPE1STYLE2S, 1902835 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35242-73?
MS35242-73 is cataloged in the U.S. Government catalog under NSN 5305-00-012-0612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35242-73

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.