PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35242-124
MS35242-124 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN, thread_length: 1.520 INCHES NOMINAL IN, screw_material: STEEL, fastener_length: 1.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-019-2784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35242-124
NSN: 5305-00-019-2784
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
thread_length1.520 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length1.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.375 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch24
NSN5305-00-019-2784
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35242-124 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
THREAD QUANTITY PER INCH: 24
•
THREAD CLASS: 2A A
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: SLOT
•
FASTENER LENGTH: 1.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
THREAD QUANTITY PER INCH24
THREAD CLASS2A A
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLESLOT
FASTENER LENGTH1.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
THREAD SERIES DESIGNATORUNF
THREAD LENGTH1.520 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
192784Interchangeable
interchangeable cross-reference
interchangeable
12285Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35242-124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35242-124?
MS35242-124 is a SCREW,MACHINE.
What parts can replace MS35242-124?
There are 2 known substitutes for MS35242-124: 192784, 12285. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35242-124?
MS35242-124 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-019-2784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35242-124

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026