PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35241-90
MS35241-90 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.092 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, screw_material: ALUMINUM, fastener_length: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-558-3246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35241-90
NSN: 5305-01-558-3246
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.092 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
screw_materialALUMINUM
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE III
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-01-558-3246
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35241-90 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE III
•
SCREW MATERIAL: ALUMINUM
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE III
SCREW MATERIALALUMINUM
NOMINAL THREAD DIAMETER0.250 INCHES IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
THREAD QUANTITY PER INCH20
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
426921Interchangeable
interchangeable cross-reference
interchangeable
MS35190-291Interchangeable
interchangeable cross-reference
interchangeable
MS35190-276Interchangeable
interchangeable cross-reference
interchangeable
NASM35190Interchangeable
interchangeable cross-reference
interchangeable
ANSI B18.6.3Interchangeable
interchangeable cross-reference
interchangeable
MS35190-271Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35241-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35241-90?
MS35241-90 is a SCREW,MACHINE.
What parts can replace MS35241-90?
There are 19 known substitutes for MS35241-90: 426921, MS35190-291, MS35190-276 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35241-90?
MS35241-90 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-558-3246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35241-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026