PartsTable
Technical Data Sheet
Download PDF

MS35241-40 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35241-40: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.761 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN, fastener_length: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-013-3444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35241-40
NSN: 5305-00-013-3444
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.761 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
fastener_length0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-013-3444
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35241-40 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-409 FED SPEC ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.761 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-409 FED SPEC ALL MATERIAL RESPONSES
THREAD LENGTH0.761 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 3
P210664Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFS92TYPE1STYLE2SReference document
Same NSN cross-reference
Reference document — Identification reference
133444Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35241-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35241-40?
MS35241-40 is a SCREW,MACHINE.
What parts can replace MS35241-40?
There are 3 known substitutes for MS35241-40: P210664, FFS92TYPE1STYLE2S, 133444. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35241-40?
MS35241-40 is cataloged in the U.S. Government catalog under NSN 5305-00-013-3444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35241-40

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.