PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35240-72
MS35240-72 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.384 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-3219, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35240-72
NSN: 5305-00-151-3219
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.384 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-00-151-3219
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35240-72 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 32
•
INTERNAL DRIVE STYLE: SLOT
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH0.500 INCHES NOMINAL IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD LENGTH0.384 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
95-6Interchangeable
interchangeable cross-reference
interchangeable
820500G62A1Interchangeable
interchangeable cross-reference
interchangeable
2W19991FA1Interchangeable
interchangeable cross-reference
interchangeable
871-0010Interchangeable
interchangeable cross-reference
interchangeable
MILE1Interchangeable
interchangeable cross-reference
interchangeable
4L1706Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35240-72?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35240-72?
MS35240-72 is a SCREW,MACHINE.
What parts can replace MS35240-72?
There are 16 known substitutes for MS35240-72: 95-6, 820500G62A1, 2W19991FA1 and 13 more. Substitute compatibility should be verified for your specific system.
Is MS35240-72 still available?
MS35240-72 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35240-72

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026