PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35238-41
MS35238-41 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-042-0059, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35238-41
NSN: 5305-00-042-0059
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNF
NSN5305-00-042-0059
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35238-41 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
•
THREAD SERIES DESIGNATOR: UNF
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
THREAD LENGTH0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
THREAD SERIES DESIGNATORUNF
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.750 INCHES NOMINAL IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
42005-49Interchangeable
interchangeable cross-reference
interchangeable
42005-9Interchangeable
interchangeable cross-reference
interchangeable
42005-39Interchangeable
interchangeable cross-reference
interchangeable
DM7402NInterchangeable
interchangeable cross-reference
interchangeable
703SN7402NInterchangeable
interchangeable cross-reference
interchangeable
5962PL1396253Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35238-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35238-41?
MS35238-41 is a SCREW,MACHINE.
What parts can replace MS35238-41?
There are 8 known substitutes for MS35238-41: 42005-49, 42005-9, 42005-39 and 5 more. Substitute compatibility should be verified for your specific system.
Is MS35238-41 still available?
MS35238-41 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35238-41

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026