MS35237-176 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS35237-176: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 1.267 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, thread_length: 1.750 INCHES MINIMUM IN, fastener_length: 2.500 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-018-6475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35237-176

NSN: 5305-00-018-6475
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	2A A
head_diameter	1.267 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
thread_length	1.750 INCHES MINIMUM IN
fastener_length	2.500 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
countersink_angle	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.750 INCHES IN
minimum_tensile_strength	60000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch	10
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
NSN	5305-00-018-6475

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENER LENGTH: 2.500 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-409 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 17TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 18TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 19TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 20TH MATERIAL RESPONSE

•

THREAD LENGTH: 1.750 INCHES MINIMUM IN

•

NOMINAL THREAD DIAMETER: 0.750 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: STEEL OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050

•

MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

FASTENER LENGTH	2.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-409 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 17TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 18TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 19TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 20TH MATERIAL RESPONSE
THREAD LENGTH	1.750 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER	0.750 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050
MINIMUM TENSILE STRENGTH	60000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
COUNTERSINK ANGLE	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM

SUBSTITUTES & CROSS-REFERENCES 1

186475Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MS35237-176?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS35237-176?

MS35237-176 is a SCREW,MACHINE.

What parts can replace MS35237-176?

There is 1 known substitute for MS35237-176: 186475. Substitute compatibility should be verified for your specific system.

What is the NSN for MS35237-176?

MS35237-176 is cataloged in the U.S. Government catalog under NSN 5305-00-018-6475. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS35237-176 — SCREW,MACHINE

Request a Quote — MS35237-176