PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35233-80
MS35233-80 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-071-1316, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35233-80
NSN: 5305-00-071-1316
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_stylePAN
head_height0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMRAP RG-33; MRAP - COUGAR AMBULANCE
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-071-1316
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35233-80 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT: PASSIVATE
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
HEAD HEIGHT0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
END ITEM IDENTIFICATIONMRAP RG-33; MRAP - COUGAR AMBULANCE
SCREW SURFACE TREATMENTPASSIVATE
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD QUANTITY PER INCH20
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
MS51957-80Interchangeable
interchangeable cross-reference
interchangeable
SSN688-128-4398Interchangeable
interchangeable cross-reference
interchangeable
4398597PC4Interchangeable
interchangeable cross-reference
interchangeable
102668-14Interchangeable
interchangeable cross-reference
interchangeable
ND25Interchangeable
interchangeable cross-reference
interchangeable
3V-84Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35233-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35233-80?
MS35233-80 is a SCREW,MACHINE.
What parts can replace MS35233-80?
There are 22 known substitutes for MS35233-80: MS51957-80, SSN688-128-4398, 4398597PC4 and 19 more. Substitute compatibility should be verified for your specific system.
Is MS35233-80 still available?
MS35233-80 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35233-80

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026