PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35226-79
MS35226-79 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL IN, screw_material: STEEL.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-637-6631, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35226-79
NSN: 5305-00-637-6631
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch28
NSN5305-00-637-6631
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35226-79 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
SCREW MATERIAL: STEEL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
THREAD LENGTH0.500 INCHES NOMINAL IN
HEAD DIAMETER0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
SCREW MATERIALSTEEL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.250 INCHES IN
INTERNAL DRIVE STYLESLOT
FASTENER LENGTH0.500 INCHES NOMINAL IN
HEAD HEIGHT0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
853-003Interchangeable
interchangeable cross-reference
interchangeable
853-3Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE9SInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35226-79?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35226-79?
MS35226-79 is a SCREW,MACHINE.
What parts can replace MS35226-79?
There are 3 known substitutes for MS35226-79: 853-003, 853-3, FFS92TYPE1STYLE9S. Substitute compatibility should be verified for your specific system.
Is MS35226-79 still available?
MS35226-79 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35226-79

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026