PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35225-5
MS35225-5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.339 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-558-3669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35225-5
NSN: 5305-00-558-3669
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.339 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-558-3669
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35225-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
THREAD QUANTITY PER INCH: 56
•
HEAD STYLE: PAN NO. 2
•
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT: CADMIUM
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL
THREAD LENGTH0.375 INCHES MINIMUM IN
THREAD QUANTITY PER INCH56
HEAD STYLEPAN NO. 2
HEAD DIAMETER0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENTCADMIUM
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-409,GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409,GRADE 3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409,GRADE 4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5305009890682Interchangeable
interchangeable cross-reference
interchangeable
19004Interchangeable
interchangeable cross-reference
interchangeable
607F489 GR2 PC51Interchangeable
interchangeable cross-reference
interchangeable
853484Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35225-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35225-5?
MS35225-5 is a SCREW,MACHINE.
What parts can replace MS35225-5?
There are 4 known substitutes for MS35225-5: 5305009890682, 19004, 607F489 GR2 PC51 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35225-5?
MS35225-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-558-3669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35225-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026