PartsTable
Technical Data Sheet
Download PDF

MS35225-42 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35225-42: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.312 INCHES NOMINAL IN, fastener_length: 0.312 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-043-6692, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35225-42
NSN: 5305-00-043-6692
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.312 INCHES NOMINAL IN
fastener_length0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-043-6692
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35225-42 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.312 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.312 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.312 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATAI TYPE AND 9S STYLE
SCREW MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
SUBSTITUTES & CROSS-REFERENCES 4
25704-281210-42-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFS92TYPE1STYLE9SReference document
Same NSN cross-reference
Reference document — Identification reference
4348Reference document
Same NSN cross-reference
Reference document — Secondary reference
436692Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35225-42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35225-42?
MS35225-42 is a SCREW,MACHINE.
What parts can replace MS35225-42?
There are 4 known substitutes for MS35225-42: 25704-281210-42-0, FFS92TYPE1STYLE9S, 4348 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35225-42?
MS35225-42 is cataloged in the U.S. Government catalog under NSN 5305-00-043-6692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35225-42

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.