PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35225-19
MS35225-19 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6644, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35225-19
NSN: 5305-00-043-6644
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-043-6644
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35225-19 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-409 GRADE 2,3 OR 4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633 FED SPEC 2ND MATERIAL RESPONSE
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
THREAD CLASS2A A
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-409 GRADE 2,3 OR 4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENTCADMIUM OR ZINC
INTERNAL DRIVE STYLESLOT
THREAD LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MS35206-219440X 3Interchangeable
interchangeable cross-reference
interchangeable
MS35225-19Interchangeable
interchangeable cross-reference
interchangeable
40-59-4-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35225-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35225-19?
MS35225-19 is a SCREW,MACHINE.
What parts can replace MS35225-19?
There are 3 known substitutes for MS35225-19: MS35206-219440X 3, MS35225-19, 40-59-4-12. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35225-19?
MS35225-19 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-043-6644. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35225-19

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026