PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35224-79
MS35224-79 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.429 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-543-2220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35224-79
NSN: 5305-00-543-2220
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN
head_height0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length0.429 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-543-2220
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35224-79 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 28
•
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW MATERIAL: STEEL
•
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD DIAMETER0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH28
HEAD HEIGHT0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
SCREW MATERIALSTEEL
THREAD LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD CLASS2A A
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
31419Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
MS5207-279Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35224-79?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35224-79?
MS35224-79 is a SCREW,MACHINE.
What parts can replace MS35224-79?
There are 3 known substitutes for MS35224-79: 31419, FFS92, MS5207-279. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35224-79?
MS35224-79 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-543-2220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35224-79

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026