PartsTable
Technical Data Sheet
Download PDF

MS35215-56 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35215-56: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-206-2507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35215-56
NSN: 5305-00-206-2507
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5305-00-206-2507
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35215-56 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 8
1A20806H49Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N81P16010Q1Reference document
Same NSN cross-reference
Reference document — Secondary reference
N0081P16010Q21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4177Reference document
Same NSN cross-reference
Reference document — Secondary reference
1736952-79Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
15287 BLK.OXIDEADXReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS35215-56?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35215-56?
MS35215-56 is a SCREW,MACHINE.
What parts can replace MS35215-56?
There are 8 known substitutes for MS35215-56: 1A20806H49, N81P16010Q1, N0081P16010Q21 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35215-56?
MS35215-56 is cataloged in the U.S. Government catalog under NSN 5305-00-206-2507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35215-56

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.