PartsTable
Technical Data Sheet
Download PDF

MS35214-69 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35214-69: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, thread_length: 0.400 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-637-1119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35214-69
NSN: 5305-00-637-1119
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
thread_length0.400 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
NSN5305-00-637-1119
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35214-69 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.400 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 6
X0402 15991Reference document
Same NSN cross-reference
Reference document — Secondary reference
1303-101Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN515PB416R8Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS35229-79Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FFS92ANDTYPE3ANDSTYLEICReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
X0402Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS35214-69?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35214-69?
MS35214-69 is a SCREW,MACHINE.
What parts can replace MS35214-69?
There are 6 known substitutes for MS35214-69: X0402 15991, 1303-101, AN515PB416R8 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35214-69?
MS35214-69 is cataloged in the U.S. Government catalog under NSN 5305-00-637-1119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35214-69

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.