PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35206-4
MS35206-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.312 INCHES NOMINAL IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-059-7655, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35206-4
NSN: 5305-00-059-7655
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.312 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.312 INCHES MINIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-059-7655
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35206-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.312 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
HEAD DIAMETER0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.312 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SCREW MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 93 STYLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5305PL0759495Interchangeable
interchangeable cross-reference
interchangeable
946119-2205Interchangeable
interchangeable cross-reference
interchangeable
10114783Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE3STYLE9CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35206-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35206-4?
MS35206-4 is a SCREW,MACHINE.
What parts can replace MS35206-4?
There are 4 known substitutes for MS35206-4: 5305PL0759495, 946119-2205, 10114783 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35206-4?
MS35206-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-059-7655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35206-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026