PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35200-3
MS35200-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, screw_material: STEEL COMP 410 OR STEEL COMP 416, fastener_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-718-9448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35200-3
NSN: 5305-00-718-9448
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
screw_materialSTEEL COMP 410 OR STEEL COMP 416
fastener_length0.250 INCHES NOMINAL IN
special_featuresLEET BALLISTIC MISSILEQUALITY,QUALITY CONTROL,POSO 911892
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-718-9448
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35200-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL COMP 410 OR STEEL COMP 416
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD CLASS: 2A A
•
HEAD DIAMETER: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
HEAD STYLE: FLAT COUNTERSUNK
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CL 3,TY C FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,CL 6,TY C FED SPEC 2ND MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL COMP 410 OR STEEL COMP 416
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SPECIAL FEATURESLEET BALLISTIC MISSILEQUALITY,QUALITY CONTROL,POSO 911892
HEAD DIAMETER0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
HEAD STYLEFLAT COUNTERSUNK
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CL 3,TY C FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,CL 6,TY C FED SPEC 2ND MATERIAL RESPONSE
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
40524002516Interchangeable
interchangeable cross-reference
interchangeable
10079716Interchangeable
interchangeable cross-reference
interchangeable
418331-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35200-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35200-3?
MS35200-3 is a SCREW,MACHINE.
What parts can replace MS35200-3?
There are 3 known substitutes for MS35200-3: 40524002516, 10079716, 418331-3. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35200-3?
MS35200-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-718-9448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35200-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026