PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35200-15
MS35200-15 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.437 INCHES NOMINAL IN, screw_material: STEEL COMP 410, fastener_length: 0.437 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-718-9434, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35200-15
NSN: 5305-00-718-9434
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.437 INCHES NOMINAL IN
screw_materialSTEEL COMP 410
fastener_length0.437 INCHES NOMINAL IN
special_featuresFLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO POSO 911882
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
NSN5305-00-718-9434
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35200-15 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
FASTENER LENGTH: 0.437 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,TYPE C,CLASS 3 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
NOMINAL THREAD DIAMETER0.112 INCHES IN
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
FASTENER LENGTH0.437 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,TYPE C,CLASS 3 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.437 INCHES NOMINAL IN
SPECIAL FEATURESFLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO POSO 911882
SCREW SURFACE TREATMENTPASSIVATE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
22225ADXInterchangeable
interchangeable cross-reference
interchangeable
P342-0047-000Interchangeable
interchangeable cross-reference
interchangeable
0920-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35200-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35200-15?
MS35200-15 is a SCREW,MACHINE.
What parts can replace MS35200-15?
There are 3 known substitutes for MS35200-15: 22225ADX, P342-0047-000, 0920-16. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35200-15?
MS35200-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-718-9434. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35200-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026