PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35199-60
MS35199-60 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-053-1088, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35199-60
NSN: 5305-00-053-1088
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength57000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5305-00-053-1088
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35199-60 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
MINIMUM TENSILE STRENGTH: 57000 POUNDS PER SQUARE INCH LBS
•
THREAD LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH57000 POUNDS PER SQUARE INCH LBS
THREAD LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
101186Interchangeable
interchangeable cross-reference
interchangeable
DS1621511-2IN FInterchangeable
interchangeable cross-reference
interchangeable
101186C1D882039098Interchangeable
interchangeable cross-reference
interchangeable
3001817Interchangeable
interchangeable cross-reference
interchangeable
1001186Interchangeable
interchangeable cross-reference
interchangeable
MT22 1079Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35199-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35199-60?
MS35199-60 is a SCREW,MACHINE.
What parts can replace MS35199-60?
There are 9 known substitutes for MS35199-60: 101186, DS1621511-2IN F, 101186C1D882039098 and 6 more. Substitute compatibility should be verified for your specific system.
Is MS35199-60 still available?
MS35199-60 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35199-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026