PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35190-293
MS35190-293 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 1.137 INCHES MINIMUM AND 1.185 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-958-5248, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35190-293
NSN: 5305-00-958-5248
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length1.137 INCHES MINIMUM AND 1.185 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentZINC
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-958-5248
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35190-293 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
HEAD STYLE: FLAT COUNTERSUNK
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OR ASTM-B633 TY2CL3 ASSN STD SINGLE TREATMENT RESPONSE
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD CLASS: 2A A
•
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENTCADMIUM OR ZINC
HEAD STYLEFLAT COUNTERSUNK
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OR ASTM-B633 TY2CL3 ASSN STD SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD CLASS2A A
HEAD DIAMETER0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
FASTENER LENGTH1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
101141Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPEISTYLE1SInterchangeable
interchangeable cross-reference
interchangeable
5305009585471Interchangeable
interchangeable cross-reference
interchangeable
1507170Interchangeable
interchangeable cross-reference
interchangeable
ASME-B18.2.1Interchangeable
interchangeable cross-reference
interchangeable
10114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35190-293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35190-293?
MS35190-293 is a SCREW,MACHINE.
What parts can replace MS35190-293?
There are 15 known substitutes for MS35190-293: 101141, FFS92TYPEISTYLE1S, 5305009585471 and 12 more. Substitute compatibility should be verified for your specific system.
Is MS35190-293 still available?
MS35190-293 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35190-293

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026