PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35190-287
MS35190-287 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.316 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-954-4295, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35190-287
NSN: 5305-00-954-4295
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.316 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE II
head_surface_treatmentCADMIUM
end_item_identification7010-01-543-7283 INSTALLATION AND EQUIPMENT KIT, DATA PROCESSING; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-954-4295
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35190-287 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 20
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
SCREW MATERIAL: STEEL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH20
NOMINAL THREAD DIAMETER0.250 INCHES IN
SCREW MATERIALSTEEL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
NONDEFINITIVE SPEC/STD DATA3 TYPE OR 2C STYLE
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
18-306Interchangeable
interchangeable cross-reference
interchangeable
240-1096-00Interchangeable
interchangeable cross-reference
interchangeable
R18CO 6Interchangeable
interchangeable cross-reference
interchangeable
550 6Interchangeable
IBM 5.5m Mini SAS to Mini SAS Cable
interchangeable
04231Interchangeable
interchangeable cross-reference
interchangeable
MS15986KP19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35190-287?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35190-287?
MS35190-287 is a SCREW,MACHINE.
What parts can replace MS35190-287?
There are 17 known substitutes for MS35190-287: 18-306, 240-1096-00, R18CO 6 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35190-287 still available?
MS35190-287 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35190-287

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026