PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35190-255
MS35190-255 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-954-2728, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35190-255
NSN: 5305-00-954-2728
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
nominal_thread_diameter0.164 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-954-2728
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35190-255 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
THREAD QUANTITY PER INCH: 32
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD QUANTITY PER INCH32
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 2C STYLE
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
NOMINAL THREAD DIAMETER0.164 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
18268Interchangeable
interchangeable cross-reference
interchangeable
1112599Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE3ANDSTYLE2CInterchangeable
interchangeable cross-reference
interchangeable
1175-8-12Interchangeable
interchangeable cross-reference
interchangeable
AN505-8R12Interchangeable
interchangeable cross-reference
interchangeable
88503Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35190-255?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35190-255?
MS35190-255 is a SCREW,MACHINE.
What parts can replace MS35190-255?
There are 26 known substitutes for MS35190-255: 18268, 1112599, FFS92ANDTYPE3ANDSTYLE2C and 23 more. Substitute compatibility should be verified for your specific system.
Is MS35190-255 still available?
MS35190-255 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35190-255

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026