PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35190-242
MS35190-242 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.824 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-958-5460, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35190-242
NSN: 5305-00-958-5460
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.824 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-958-5460
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35190-242 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
THREAD LENGTH: 0.824 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
•
SCREW MATERIAL: STEEL
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.138 INCHES IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
THREAD LENGTH0.824 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH32
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
10387408Interchangeable
interchangeable cross-reference
interchangeable
1825BLACKInterchangeable
interchangeable cross-reference
interchangeable
70A0203Interchangeable
interchangeable cross-reference
interchangeable
18250Interchangeable
interchangeable cross-reference
interchangeable
20204Interchangeable
interchangeable cross-reference
interchangeable
20BA02Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35190-242?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35190-242?
MS35190-242 is a SCREW,MACHINE.
What parts can replace MS35190-242?
There are 16 known substitutes for MS35190-242: 10387408, 1825BLACK, 70A0203 and 13 more. Substitute compatibility should be verified for your specific system.
Is MS35190-242 still available?
MS35190-242 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35190-242

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026