PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS3498-1
MS3498-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,METALLIC is a the manufacturer industrial component. Key specifications include diameter: 0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2011 GROMMET, drive_type: SLOTTED, eyelet_length: 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, stud_head_height: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-817-0510, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS3498-1
NSN: 5325-00-817-0510
FSC: 5325
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2011 GROMMET
drive_typeSLOTTED
eyelet_length0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
stud_head_height0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
stud_assembly_styleSTUD ASSEMBLY
securing_device_typeGROMMET
eyelet_outside_diameter0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT FILLISTER
material_accommodated_thickness0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
material_document_and_classificationAMS 5640 ASSN STD SINGLE MATERIAL RESPONSE STUD
NSN5325-00-817-0510
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS3498-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
B10-2Interchangeable
interchangeable cross-reference
interchangeable
43654Interchangeable
interchangeable cross-reference
interchangeable
00725665450150Interchangeable
interchangeable cross-reference
interchangeable
EG873Interchangeable
interchangeable cross-reference
interchangeable
EG-758Interchangeable
interchangeable cross-reference
interchangeable
EG-818Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS3498-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS3498-1?
MS3498-1 is a GROMMET,METALLIC.
What parts can replace MS3498-1?
There are 25 known substitutes for MS3498-1: B10-2, 43654, 00725665450150 and 22 more. Substitute compatibility should be verified for your specific system.
Is MS3498-1 still available?
MS3498-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS3498-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026