MS3420-4A — BUSHING,NONMETALLIC

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MS3420-4A: BUSHING,NONMETALLIC.

The BUSHING,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, design_type: SINGLE CENTRALLY LOCATED HOLE, body_diameter: 0.302 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: ROUND, center_hole_diameter: 0.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-00-682-1427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS3420-4A

NSN: 5365-00-682-1427
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR
design_type	SINGLE CENTRALLY LOCATED HOLE
body_diameter	0.302 INCHES NOMINAL IN
overall_length	2.000 INCHES NOMINAL IN
style_designator	ROUND
center_hole_diameter	0.219 INCHES NOMINAL IN
nonmetallic_hardness_rating	45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER
material_document_and_classification	MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE
NSN	5365-00-682-1427

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.302 INCHES NOMINAL IN

•

DESIGN TYPE: SINGLE CENTRALLY LOCATED HOLE

•

STYLE DESIGNATOR: ROUND

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE

•

CENTER HOLE DIAMETER: 0.219 INCHES NOMINAL IN

•

MATERIAL: RUBBER CHLOROPRENE CLASS CR

•

NONMETALLIC HARDNESS RATING: 45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.302 INCHES NOMINAL IN
DESIGN TYPE	SINGLE CENTRALLY LOCATED HOLE
STYLE DESIGNATOR	ROUND
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH	2.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER	0.219 INCHES NOMINAL IN
MATERIAL	RUBBER CHLOROPRENE CLASS CR
NONMETALLIC HARDNESS RATING	45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER

SUBSTITUTES & CROSS-REFERENCES 7

853384-04Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

853384-4Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AN3420-4AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

910482-02Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

5365PL0842102Reference document

Same NSN cross-reference

Reference document — Informative reference only

558-00-030200024Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS3420-4A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS3420-4A?

MS3420-4A is a BUSHING,NONMETALLIC.

What parts can replace MS3420-4A?

There are 7 known substitutes for MS3420-4A: 853384-04, 853384-4, AN3420-4A and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS3420-4A?

MS3420-4A is cataloged in the U.S. Government catalog under NSN 5365-00-682-1427. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS3420-4A — BUSHING,NONMETALLIC

Request a Quote — MS3420-4A