PartsTable
Technical Data Sheet
Download PDF

MS3393-12 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS3393-12: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 85.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, center_hole_diameter: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, cross-sectional_height: 0.097 INCHES NOMINAL IN, cross-sectional_shape_style: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-631-2446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS3393-12
NSN: 5330-01-631-2446
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating85.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
center_hole_diameter0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
cross-sectional_height0.097 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
part_name_assigned_by_controlling_agencyPACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC
NSN5330-01-631-2446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS3393-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.097 INCHES NOMINAL IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
PERIPHERAL DIAMETER: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.097 INCHES NOMINAL IN
HARDNESS RATING85.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
PERIPHERAL DIAMETER0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
SAE-AS33931Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS3393-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS3393-12?
MS3393-12 is a PACKING,PREFORMED.
What parts can replace MS3393-12?
There is 1 known substitute for MS3393-12: SAE-AS33931. Substitute compatibility should be verified for your specific system.
What is the NSN for MS3393-12?
MS3393-12 is cataloged in the U.S. Government catalog under NSN 5330-01-631-2446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS3393-12