PartsTable
Technical Data Sheet
MS29561-249 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 5.137 INCHES NOMINAL IN, center_hole_diameter: 4.844 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-684-2547, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29561-249
NSN: 5331-00-684-2547
FSC: 5331 — O-RING
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter5.137 INCHES NOMINAL IN
center_hole_diameter4.844 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-684-2547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29561-249 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OUTSIDE DIAMETER: 5.137 INCHES NOMINAL IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER: 4.844 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE: 250 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER5.137 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER4.844 INCHES MINIMUM AND 4.874 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE250 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
10172776Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS29561Interchangeable
interchangeable cross-reference
interchangeable
MS29561-264Interchangeable
interchangeable cross-reference
interchangeable
5303-0600Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-7362Interchangeable
interchangeable cross-reference
interchangeable
AS568-437Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS29561-249?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29561-249?
MS29561-249 is a O-RING.
What parts can replace MS29561-249?
There are 23 known substitutes for MS29561-249: 10172776, SAE-AS29561, MS29561-264 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS29561-249 still available?
MS29561-249 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29561-249