PartsTable
Technical Data Sheet
Download PDF

MS29561-236 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS29561-236: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: PACKING,PREFORMED,O-RING,SYNTHETIC LUBRICANT RESISTANT.. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-684-7795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29561-236
NSN: 5331-00-684-7795
NIINs: 006847795, 016237032
FSC: 5331 — O-ring
CAGE: AC910 — AERTEKNO S.R.L. (ITA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyPACKING,PREFORMED,O-RING,SYNTHETIC LUBRICANT RESISTANT.
NSN5331-00-684-7795
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29561-236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.512 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
CENTER HOLE DIAMETER: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.512 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE250 MAXIMUM
CENTER HOLE DIAMETER3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 7
04050452033985Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5331PL0144164Reference document
Same NSN cross-reference
Reference document — Informative reference only
SAE-AS29561Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-236 47-071Reference document
Same NSN cross-reference
Reference document — Secondary reference
38 76504 2236 2Reference document
Same NSN cross-reference
Reference document — Secondary reference
JKN00083939Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy MS29561-236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29561-236?
MS29561-236 is a O-RING.
What parts can replace MS29561-236?
There are 7 known substitutes for MS29561-236: 04050452033985, 5331PL0144164, SAE-AS29561 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS29561-236?
MS29561-236 is cataloged in the U.S. Government catalog under NSN 5331-00-684-7795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29561-236