PartsTable
Technical Data Sheet
PartsTable / O-RING / MS29513-236
MS29513-236 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN, center_hole_diameter: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: LOGISTICS SUPPORT VESSEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3069, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29513-236
NSN: 5331-00-291-3069
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN
center_hole_diameter3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationLOGISTICS SUPPORT VESSEL
NSN5331-00-291-3069
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29513-236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
OUTSIDE DIAMETER3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
ABT11236Interchangeable
interchangeable cross-reference
interchangeable
077-9655Interchangeable
interchangeable cross-reference
interchangeable
23570010Interchangeable
interchangeable cross-reference
interchangeable
11236Interchangeable
interchangeable cross-reference
interchangeable
A11236Interchangeable
interchangeable cross-reference
interchangeable
1400Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS29513-236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29513-236?
MS29513-236 is a O-RING.
What parts can replace MS29513-236?
There are 22 known substitutes for MS29513-236: ABT11236, 077-9655, 23570010 and 19 more. Substitute compatibility should be verified for your specific system.
Is MS29513-236 still available?
MS29513-236 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29513-236

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026