Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.558 INCHES NOMINAL IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-827-6917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS29512-5CP
NSN:5331-00-827-6917 FSC:5331 — O-RING CAGE:03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
material
RUBBER SYNTHETIC
temp_rating
-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating
60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
outside_diameter
0.558 INCHES NOMINAL IN
center_hole_diameter
0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
elongation_percentage
200 MAXIMUM
cross-sectional_height
0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
departure_from_cited_document
CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification
ZZZW
NSN
5331-00-827-6917
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL: RUBBER SYNTHETIC
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING
-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
HARDNESS RATING
60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM
MATERIAL
RUBBER SYNTHETIC
CRITICALITY CODE JUSTIFICATION
ZZZW
DEPARTURE FROM CITED DOCUMENT
CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29512-5CP?
MS29512-5CP is a O-RING.
What parts can replace MS29512-5CP?
There are 5 known substitutes for MS29512-5CP: MS29512-05, S8316U5, MS29512-5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS29512-5CP?
MS29512-5CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-827-6917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.