PartsTable
Technical Data Sheet
PartsTable / O-RING / MS29512-10/3-910
MS29512-10/3-910 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MS29512-10/3-910 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-263-8032, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29512-10/3-910
NSN: 5331-00-263-8032
FSC: 5331 — O-RING
CAGE: 1K697 — DBR INDUSTRIES, INC. DBA DBR INDUSTRIES INC (USA)
SPECIFICATIONS
Part NumberMS29512-10/3-910
NSN5331-00-263-8032
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29512-10/3-910 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1224Interchangeable
interchangeable cross-reference
interchangeable
1229G423Interchangeable
interchangeable cross-reference
interchangeable
115551Interchangeable
interchangeable cross-reference
interchangeable
10653Interchangeable
interchangeable cross-reference
interchangeable
25769Interchangeable
interchangeable cross-reference
interchangeable
51634Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS29512-10/3-910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29512-10/3-910?
MS29512-10/3-910 is a MS29512-10/3-910.
What parts can replace MS29512-10/3-910?
There are 21 known substitutes for MS29512-10/3-910: 1224, 1229G423, 115551 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS29512-10/3-910 still available?
MS29512-10/3-910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29512-10/3-910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026