PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28932CL10
MS28932CL10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL AND COTTON OVERALL, overall_width: 0.188 INCHES NOMINAL IN, overall_length: 10.000 INCHES NOMINAL IN, style_designator: RECTANGULAR, cross-sectional_width: 0.188 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-685-5538, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28932CL10
NSN: 5330-00-685-5538
FSC: 5330
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialWOOL AND COTTON OVERALL
overall_width0.188 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL IN
style_designatorRECTANGULAR
cross-sectional_width0.188 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-00-685-5538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28932CL10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
CROSS-SECTIONAL WIDTH: 0.188 INCHES NOMINAL IN
•
MATERIAL: WOOL AND COTTON OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: V
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH10.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
OVERALL WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
MATERIALWOOL AND COTTON OVERALL
CROSS-SECTIONAL SHAPE STYLEV
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
503371Interchangeable
interchangeable cross-reference
interchangeable
C-F-206 TYPE 1Interchangeable
interchangeable cross-reference
interchangeable
PB344AInterchangeable
interchangeable cross-reference
interchangeable
005991301Interchangeable
interchangeable cross-reference
interchangeable
B344AInterchangeable
interchangeable cross-reference
interchangeable
MS28932C-10-00Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28932CL10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28932CL10?
MS28932CL10 is a FELT,MECHANICAL,PREFORMED.
What parts can replace MS28932CL10?
There are 8 known substitutes for MS28932CL10: 503371, C-F-206 TYPE 1, PB344A and 5 more. Substitute compatibility should be verified for your specific system.
Is MS28932CL10 still available?
MS28932CL10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28932CL10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026