PartsTable
Technical Data Sheet
PartsTable / O-RING / MS28775-443
MS28775-443 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, peripheral_diameter: 8.025 INCHES NOMINAL IN, center_hole_diameter: 7.445 INCHES MINIMUM AND 7.505 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-815-2450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-443
NSN: 5331-00-815-2450
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
peripheral_diameter8.025 INCHES NOMINAL IN
center_hole_diameter7.445 INCHES MINIMUM AND 7.505 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationZZZW
NSN5331-00-815-2450
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-443 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
AN6227B-70Interchangeable
interchangeable cross-reference
interchangeable
AN6227-70Interchangeable
interchangeable cross-reference
interchangeable
575-2200-1487115REVAPC30Interchangeable
interchangeable cross-reference
interchangeable
A17024Interchangeable
interchangeable cross-reference
interchangeable
A-23998-1Interchangeable
interchangeable cross-reference
interchangeable
900120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28775-443?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-443?
MS28775-443 is a O-RING.
What parts can replace MS28775-443?
There are 21 known substitutes for MS28775-443: AN6227B-70, AN6227-70, 575-2200-1487115REVAPC30 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28775-443?
MS28775-443 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-815-2450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-443

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026