PartsTable
Technical Data Sheet
Download PDF

MS28775-251 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS28775-251: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 5.387 INCHES NOMINAL IN, center_hole_diameter: 5.074 INCHES MINIMUM AND 5.144 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 3.530 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-054-6887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-251
NSN: 5330-00-054-6887
NIINs: 000546887, 010393076
FSC: 5330 — Packing and Gasket Materials
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter5.387 INCHES NOMINAL IN
center_hole_diameter5.074 INCHES MINIMUM AND 5.144 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height3.530 MILLIMETERS NOMINAL MM
NSN5330-00-054-6887
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-251 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 5.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CENTER HOLE DIAMETER5.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
07-635273Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ARP568-252Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6230-29Reference document
Same NSN cross-reference
Reference document — Secondary reference
230079141Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN6230B29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MILP5516Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS28775-251?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-251?
MS28775-251 is a O-RING.
What parts can replace MS28775-251?
There are 8 known substitutes for MS28775-251: 07-635273, ARP568-252, AN6230-29 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28775-251?
MS28775-251 is cataloged in the U.S. Government catalog under NSN 5330-00-054-6887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-251