PartsTable
Technical Data Sheet
PartsTable / O-RING / MS28775-153
MS28775-153 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN, center_hole_diameter: 3.472 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-420-7590, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-153
NSN: 5331-00-420-7590
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN
center_hole_diameter3.472 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-420-7590
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-153 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.472 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.472 INCHES MINIMUM AND 3.502 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
000-7198-000Interchangeable
interchangeable cross-reference
interchangeable
1-1153Interchangeable
interchangeable cross-reference
interchangeable
R11153Interchangeable
interchangeable cross-reference
interchangeable
HDH-09003GHDInterchangeable
interchangeable cross-reference
interchangeable
480107-1Interchangeable
interchangeable cross-reference
interchangeable
1205-0226Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28775-153?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-153?
MS28775-153 is a O-RING.
What parts can replace MS28775-153?
There are 20 known substitutes for MS28775-153: 000-7198-000, 1-1153, R11153 and 17 more. Substitute compatibility should be verified for your specific system.
Is MS28775-153 still available?
MS28775-153 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-153

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026