PartsTable
Technical Data Sheet
Download PDF

MS28775-031 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS28775-031: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.858 INCHES MINIMUM AND 1.900 INCHES MAXIMUM IN, center_hole_diameter: 1.729 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-053-9467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-031
NSN: 5330-00-053-9467
NIINs: 000539467, 010242506
FSC: 5330 — Packing and Gasket Materials
CAGE: 96907 — FASSLER M J AND CO INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.858 INCHES MINIMUM AND 1.900 INCHES MAXIMUM IN
center_hole_diameter1.729 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5330-00-053-9467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-031 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.739 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.739 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
2-031 N756-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
031-737-70ANReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS28775-031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-031?
MS28775-031 is a O-RING.
What parts can replace MS28775-031?
There are 2 known substitutes for MS28775-031: 2-031 N756-75, 031-737-70AN. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28775-031?
MS28775-031 is cataloged in the U.S. Government catalog under NSN 5330-00-053-9467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-031