PartsTable
Technical Data Sheet
Download PDF

MS28774-128CP — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS28774-128CP: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.627 INCHES MINIMUM IN, center_hole_diameter: 1.521 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-072-2200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28774-128CP
NSN: 5330-01-072-2200
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.627 INCHES MINIMUM IN
center_hole_diameter1.521 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-072-2200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28774-128CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 1.627 INCHES MINIMUM IN
•
CENTER HOLE DIAMETER: 1.521 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER1.627 INCHES MINIMUM IN
CENTER HOLE DIAMETER1.521 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
PL2850-0020 FIND64CPReference document
Same NSN cross-reference
Reference document — Secondary reference
MS28774-128Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28774Reference document
Same NSN cross-reference
Reference document — Identification reference
910751Reference document
Same NSN cross-reference
Reference document — Secondary reference
910751CPReference document
Same NSN cross-reference
Reference document — Secondary reference
V3D10118 ITEM 33Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS28774-128CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28774-128CP?
MS28774-128CP is a RETAINER,PACKING.
What parts can replace MS28774-128CP?
There are 8 known substitutes for MS28774-128CP: PL2850-0020 FIND64CP, MS28774-128, MS28774 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28774-128CP?
MS28774-128CP is cataloged in the U.S. Government catalog under NSN 5330-01-072-2200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28774-128CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.