PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28762-100500
MS28762-100500 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 12.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.562 INCHES NOMINAL IN, connection_style: SWIVEL NUT WITH COMPRESSION SLEEVE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-720-4066, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28762-100500
NSN: 4720-00-720-4066
FSC: 4720
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
seat_angle12.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.562 INCHES NOMINAL IN
connection_styleSWIVEL NUT WITH COMPRESSION SLEEVE FIRST END
outside_diameter1.031 INCHES NOMINAL IN
special_featuresINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_directionRIGHT-HAND FIRST END
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
NSN4720-00-720-4066
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS28762-100500 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FITTING COMPONENT AND SURFACE TREATMENT: NUT CADMIUM FIRST END
•
LAYER COMPOSITION AND LOCATION: 2ND LAYER BRAIDED STEEL WIRE
•
THREAD CLASS: 3B FIRST END
•
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
INSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
FITTING COMPONENT AND SURFACE TREATMENTNUT CADMIUM FIRST END
LAYER COMPOSITION AND LOCATION2ND LAYER BRAIDED STEEL WIRE
FITTING COMPONENT AND SURFACE TREATMENTNIPPLE CADMIUM ALL ENDS
THREAD CLASS3B FIRST END
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
INSIDE DIAMETER0.562 INCHES NOMINAL IN
END CONNECTION DESIGNSTRAIGHT FIRST END
FITTING COMPONENT AND SURFACE TREATMENTSOCKET ANODIZE SECOND END
CONNECTION STYLESWIVEL NUT WITH COMPRESSION SLEEVE FIRST END
OUTSIDE DIAMETER1.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
456597Interchangeable
interchangeable cross-reference
interchangeable
27385Interchangeable
interchangeable cross-reference
interchangeable
MILB2213Interchangeable
interchangeable cross-reference
interchangeable
D2738-5Interchangeable
interchangeable cross-reference
interchangeable
803-6397319Interchangeable
interchangeable cross-reference
interchangeable
DR27385Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28762-100500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28762-100500?
MS28762-100500 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MS28762-100500?
There are 8 known substitutes for MS28762-100500: 456597, 27385, MILB2213 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28762-100500?
MS28762-100500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-720-4066. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28762-100500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026