PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28741-8-0850
MS28741-8-0850 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-878-5830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28741-8-0850
NSN: 4720-00-878-5830
FSC: 4720
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.406 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.766 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-878-5830
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS28741-8-0850 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.406 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 8000.0 POUNDS PER SQUARE INCH LBS
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
OUTER COVERING ENVIRONMENTAL PROTECTION: MILDEW RESISTANT AND OIL RESISTANT
•
OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
NOMINAL THREAD SIZE: 0.750 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.406 INCHES NOMINAL IN
BURST TEST PRESSURE8000.0 POUNDS PER SQUARE INCH LBS
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
OUTER COVERING ENVIRONMENTAL PROTECTIONMILDEW RESISTANT AND OIL RESISTANT
OUTSIDE DIAMETER0.766 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
VACUUM IN TORR50.8
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
906R620Interchangeable
interchangeable cross-reference
interchangeable
327-985Interchangeable
interchangeable cross-reference
interchangeable
521231Interchangeable
interchangeable cross-reference
interchangeable
57F903648-1Interchangeable
interchangeable cross-reference
interchangeable
69-11-D836-1671Interchangeable
interchangeable cross-reference
interchangeable
871398-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28741-8-0850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28741-8-0850?
MS28741-8-0850 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MS28741-8-0850?
There are 9 known substitutes for MS28741-8-0850: 906R620, 327-985, 521231 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28741-8-0850?
MS28741-8-0850 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-878-5830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28741-8-0850

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026