PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS28741-10-0780
MS28741-10-0780 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-801-7848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28741-10-0780
NSN: 4720-00-801-7848
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.922 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure7000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-801-7848
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MS28741-10-0780 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 7000.0 POUNDS PER SQUARE INCH LBS
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ALCOHOL RESISTANT AND OZONE RESISTANT AND FUEL RESISTANT AND OIL RESISTANT
•
MEDIA FOR WHICH DESIGNED: AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE7000.0 POUNDS PER SQUARE INCH LBS
INSIDE DIAMETER0.500 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION STYLESWIVEL NUT FLARE FIRST END
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONALCOHOL RESISTANT AND OZONE RESISTANT AND FUEL RESISTANT AND OIL RESISTANT
MEDIA FOR WHICH DESIGNEDAIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
OUTSIDE DIAMETER0.922 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MS28741-4-0062Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-8795Interchangeable
interchangeable cross-reference
interchangeable
MS28741-10-0700Interchangeable
interchangeable cross-reference
interchangeable
360-10D0720Interchangeable
interchangeable cross-reference
interchangeable
88019-224-1Interchangeable
interchangeable cross-reference
interchangeable
MS28741-4-0080Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28741-10-0780?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28741-10-0780?
MS28741-10-0780 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MS28741-10-0780?
There are 26 known substitutes for MS28741-10-0780: MS28741-4-0062, MIL-H-8795, MS28741-10-0700 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS28741-10-0780?
MS28741-10-0780 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-801-7848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28741-10-0780

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026